NSX-R Style Maintenance Engine Lid — Aluminium
The NSX-R’s visible-engine-bay presentation in a lid built to outlast composite alternatives: a single piece of 6061 aluminium with a welded protective mesh, structurally rigid where fibreglass warps under engine heat and immune to the UV and clear-coat aging of carbon — and repairable and refinishable by conventional aluminium methods. At only 3.9 kg it is also light. A redesigned support frame is 100% Targa (NSX-T) friendly, fitting the Targa firewall layout without spacers, and the original factory seal and OEM installation hardware fit this lid as intended.
What’s Included
- Maintenance engine lid (69110-NMP-900).
Specifications
| Part Number | 69110-NMP-900 |
| Material | 6061 aluminium unibody, welded protective mesh |
| Weight | 3.9 kg (lid) |
| Applicable Models | 1991–2005 (all NSX models) |
| Required Hinges | Coupe: OEM standard — Targa: OEM NSX-R or NSX-S |
Installation
One fitting order governs the job, from this page: install the hinges onto the maintenance lid first, then mount the assembly onto the body of the NSX. Check your hinges before starting — Coupe cars use their OEM standard hinges, while Targa cars require OEM NSX-R or NSX-S hinges. The factory manual’s rear hatch procedure sits behind this job (the engine cover is its first step), and where the hatch itself must come off — a Targa hinge change — the manual’s torques apply there: hinge nuts 22 N·m, strut bolts 10 N·m. Our step-by-step guide covers the whole job, including the manual’s hatch procedure and its leak checks:
Installation Guide
Download our step-by-step installation guide (PDF, English / Japanese), with illustrations from the factory service manual: Download the installation guide (PDF)
MITA Motorsports — Technical Division




4 reviews for MITA Aluminum NSX-R Style Maintenance Engine Lid
Eric Lazo (verified owner) –
Fit my targa perfectly. Great
JH (verified owner) –
High quality OEM reproduction.
David Reynolds (verified owner) –
Very high quality! Perfect for Targas
William Hughes (verified owner) –
In search of a factory engine lid, I discovered it had been discontinued, prompting me to seek alternatives. Although the fiberglass options from Scienceofspeed were suggested, I was intent on finding something that matched OEM quality. Fortunately, I found just the thing, and it fits seamlessly with the OEM hardware functioning flawlessly. The craftsmanship is truly impressive.
Only logged in customers who have purchased this product may leave a review.