NSX Keyless Entry System
Elevate your driving experience with seamless convenience and enhanced security. The NSX was never offered with remote locking; this system adds it — lock and unlock your doors with matching remote transmitters, integrated into the car’s own wiring beneath the dashboard. Installation is staged: keyless entry first, with parking-light flash and remote trunk release as stages you can fit on the day or add later.
Three stages, in your own time — Stage one is keyless entry alone: remove the dash under cover (2 screws, three barbs), plug the unit into the factory keyless connector at the carpet line under the glove box — 12-terminal on NA1-100 cars, which use the included adapter, 14-terminal on NA1-110 and later — and test the locks. On its own, that stage takes about 15 minutes. Stage two adds the flasher harness, fished behind the radio (the stereo stays in), so the parking lights flash once on unlocking and twice on locking. Stage three adds the trunk release harness, worked through the glove box to a blue 20-terminal connector: hold the remote’s trunk button for three seconds and the lights flash three times as the trunk releases. Stages two and three are optional, independent of each other, and can be added at any later session without undoing stage one.
What’s Included
- Keyless Unit with matching remote transmitters
- Flasher Harness with 18 terminals
- Keyless harness with flat white and 14-terminal grey connectors
- Trunk Release harness with 20 terminals
- NA1-100 Adapter (required for early production) with 12-terminal harness
Specifications
| Part Number | 35AR3-NMP-003 |
|---|---|
| Functions | Remote lock/unlock; optional parking-light flash (once unlock / twice lock); optional trunk release (3-second hold, triple flash) |
| Installation | Three stages — keyless-only in about 15 minutes; light flash and trunk release addable later; full RHD procedure in the guide |
| Tools Required | Phillips #2 screwdriver; wire fish; tape; 7mm wrench/spanner/socket (trunk release); optional wide flat screwdriver |
| Fitment | Procedure written for RHD cars; optimised for early-generation Japanese domestic RHD NSX — see the compatibility note below |
Please Note — Compatibility Information. The MITA NSX Keyless System, as described in the installation guide, is specifically designed for installation in early-generation Japanese domestic right-hand drive NSX models, and its functionality and installation steps are optimized for this particular vehicle configuration. If you own a different NSX model, a left-hand drive version, or a vehicle from a different region, please exercise caution and ensure compatibility before proceeding with the installation. We recommend consulting a qualified automotive professional or contacting our customer support team for guidance on the suitability of the system for your specific vehicle.
Installation
The full procedure is a right-hand-drive one, and our guide follows it stage by stage, with a checkpoint test at the end of each stage: the main unit (under cover off, factory connector at the carpet line, locks tested before anything goes back on); the light flash (driver-side panel off — the plastic locating pins under the steering column are fragile — the factory 18-terminal connector tapped, the small connector fished behind the radio to the passenger side); the trunk release (glove box door and insert out — 4 screws each, and never the two screws either side of the latch striker bar — the side vent cover with its 7mm screw reached from behind, the vent tube out, and the supplied 20-terminal connector fitted at the blue connector, top row, second from the left); then the unit zip-tied to the passenger-side lower cover and everything refitted, finishing with tests of the remotes, the driver-door trunk button and the headlight switch. The factory service manual predates this system and contains no procedure for it — our guide is built on the system’s own installation instructions, with the manual’s door-lock and security unit locations given as context:
Installation Guide
Download our step-by-step installation guide (PDF, English / Japanese): Download the installation guide (PDF)
MITA Motorsports — Technical Division




4 reviews for MITA NSX Keyless Entry System
chi chun neo choi (verified owner) –
fast shipping , and good customer service
Kuroda H. (verified owner) –
Thank you so much !!
Cary (verified owner) –
Nice quality
Anonymous (verified owner) –
Works like a charm.
Only logged in customers who have purchased this product may leave a review.