2000+ ABS Conversion Kit for 1991–1999 NSX
The ABS modulator has been discontinued, and it is not included in this kit. We are not liable for any issues arising from the installation of used modulators. Only NSX modulators should be used.
This kit converts a 1991–1999 NSX from its original ALB system to the integrated ABS of the 2000–2005 NSX. The early system — a separate pump, a pressurised accumulator, a modulator/solenoid unit and a cabin control unit — was advanced for 1991 but is heavy, complex, and known for breaking down, most often at the accumulator. The 2000+ system puts everything into one modulator with its control electronics built in: faster control, a large weight saving, no more pump noise from the front compartment, and it shares the ordinary brake master cylinder reservoir instead of a pressurised supply of its own. You supply a genuine 2000+ NSX modulator (see below); this kit supplies every genuine Honda pipe, valve, bracket and clip that connects to it, plus the electrical harness that makes it work in an early car.
You must source the modulator yourself — here is how to be sure it is the right one. NSX modulators of this era look identical to other Honda units, so check the unit, not its appearance: a genuine NSX modulator has a serial number etched into the top of the black plastic housing that begins with “H”, and its barcode sticker reads 57105-SL0 010 (the “010” identifies the NSX unit, with traction control output). A sticker ending “J50” is a different model’s unit — visually identical and not suitable for this conversion. The part number (57110-SL0-Z03) appears only on the modulator’s shipping box, never on the unit itself.
Standard or NSX-R modulator? The standard, Type S and Type S Zero modulators share the same brake hardware, with software optimised across various driving conditions — the right choice for nearly all owners. The NSX-R modulator is programmed around that car’s smaller master cylinder and brake booster and optimised for track driving, which can make it less than optimal on city streets.
The harness is the heart of this kit. Converting the car is as much electrical as hydraulic: the harness connects the ALB computer couplers behind the glove box to the modulator in the front compartment. Ours splits at a small connector part-way along its length, so it passes through the factory firewall grommet without cutting anything, and it includes the genuine error check connector — the converted car keeps factory-style self-diagnosis (ABS faults read as blink codes, exactly as stock) and can be serviced at a Honda/Acura dealer as if it were a 2000+ model. The kit also includes the ABS indicator light relay — without it, the ABS warning lamp stays lit permanently and can no longer warn you about the system. Replacing the relay is necessary on 1995–1999 applications.
One consequence to know before you order: on early cars the ABS and traction control are linked, so after this conversion the traction control (TCS) no longer functions. Everything else, warning lamps and diagnostics included, works as factory.
What’s Included
- Modulator bracket
- Proportioning valve and valve bracket
- 3× rubber modulator mounts and modulator mounting bolts
- Eight genuine brake pipes for your car (LHD or RHD set)
- Brake pipe clips and all fitting hardware
- ABS indicator light relay
- ABS conversion electrical harness with genuine error check connector
- Not included: the ABS modulator (discontinued — see above) and brake fluid.
Specifications
| Part Numbers | Bracket 57116-SL0-000 · Proportioning valve 46210-SL0-003 · Valve bracket 46215-SL0-000 · Mounts 57101-S2A-003 ×3 · Pipes (LHD) 46372–46376-SL0-D00, 46377-SL0-D01, 46378-SL0-D00, 46379-SL0-D01 · Pipes (RHD) 46372–46377-SL0-N00, 46378/46379-SL0-N01 · Relay 39797-SE0-003 |
| Fitment | 1991–1999 NSX — choose Left Hand Drive or Right Hand Drive; the brake pipes differ |
| You supply | A genuine 2000+ NSX ABS modulator (57110-SL0-Z03) — verify by the etched “H” serial and “010” sticker; DOT 3 or 4 brake fluid |
| Effect on TCS | Traction control no longer functions after conversion (early ABS/TCS are linked) |
| Diagnostics | Factory-style self-diagnosis retained (genuine error check connector included) |
Installation
A full conversion, in four movements: the old system is depressurised with the factory Bleeder T-Wrench and removed; the new unit is bench-built on the supplied bracket (your modulator, the proportioning valve, the pipes pre-fitted); the harness is run through the factory grommet via its mid-harness connector and plugged in at the ALB computer’s couplers behind the glove box; and the brakes are bled as a normal NSX, in the factory sequence — no separate ABS bleeding procedure exists on the converted system. Factory pipe-fitting torque is 19 N·m throughout. A workshop needs most of a day; a first-time installer should allow two to three relaxed days. Our step-by-step guide covers the complete job, including the depressurisation procedure, the modulator identification check, and the bleeding sequence:
Installation Guide
Download our step-by-step installation guide (PDF, English / Japanese), with illustrations from the factory service manual: Download the installation guide (PDF)
MITA Motorsports — Technical Division




1 review for OEM Honda / Acura NSX 2000+ ABS Brake Line Upgrade Kit
George (verified owner) –
Great price and service as always
Only logged in customers who have purchased this product may leave a review.